Automatic forging furnace-integrated forging furnace

The new energy-saving medium-frequency induction heating diathermy forging furnace produced by Haituo can be used for continuous heat diathermation of steel, stainless steel, copper, aluminum, etc. with a diameter of Φ12-80Φ for regular round bar stock, square material or other shape wool materials; Standard parts industry, stud head pier thickness, nut forming, valve and lock industry copper thermoforming, etc.; It can be used for overall heating of materials, and can also be used for local heating of materials, such as end heating, intermediate heating, etc.

Main configuration and performance
Medium frequency induction heating forging furnace ultra-small volume, movable, covers an area of only 0.6 square meters, convenient to use with any equipment; installation, debugging and operation are very convenient, one learning can learn;

It can reach the required temperature in a very short time, which greatly reduces the oxidation of metals;
Medium frequency heating of φ15 or more bar stock, more permeable, more uniform, faster, can work 24 hours uninterrupted;
Power saving and environmental protection, more uniform and fast heat penetration, automatic feeding, greatly saving costs;
The furnace body is replaced to adapt to the different requirements of overall heating of bar stock or end heating.
◆ IGBT devices are adopted, and high-efficiency combined resonance technology is adopted. Low-inductance circuit arrangement and large-scale digital circuitry are adopted. ◆ Fast heating speed, high production efficiency, less oxidation and decarbonization, saving material and forging die costs. Since the principle of medium frequency induction heating is electromagnetic induction, its heat is generated in the workpiece itself, and ordinary workers can carry out continuous work of forging tasks immediately after working with medium frequency electric furnaces. Don't worry about wasting heated blanks due to power outages or equipment failures. Due to the fast heating rate of this heating method, so the oxidation is very small, each ton of forgings and KGPS thyristor intermediate frequency furnace save at least 20-50 kg of steel raw materials, greatly save electricity, each ton of heating steel, power consumption 310 degrees. It saves 20%-30% of power compared to KGPS thyristor medium frequency. Due to the uniform heating of this heating method, the temperature difference of the core meter is extremely small, which will not bring pollution on the network side, the power supply transformer does not heat, the substation compensation capacitor does not heat up, and does not interfere with the work of other equipment. Reduce the capacity of the power supply transformer. ◆ The length of the induction coil is usually 600mm or 800mm, and when the coarse material or material is long, the induction coil is even 1 meter long or more than 1 meter in length, and there are 5--10 pieces of material in heating. The induction coil is easy to replace, and different sizes of induction coils are used according to the workpiece of different diameters. ◆ The output frequency is 1-10KHZ, according to the size of the diameter of the heating workpiece, design the induction coil and capacitor, reach different frequencies, and adapt to the heating of different materials. When the material is fine, the heating frequency is higher, which can ensure heat permeability and obtain higher heating efficiency; When the material is coarse, the frequency should be lower to ensure heat permeability. ◆ Using pneumatic feeding method, for a certain bar material, adjust the equipment power and feeding beat, you can automatically launch the red-hot bar material for forging use, the operation is very convenient. ◆ Uniform heating, small temperature difference of core meter, high temperature control accuracy. Induction heating, its heat is generated in the workpiece, so the heating is uniform, and the temperature difference of the core table is extremely small. The application of temperature control system can achieve precise control of temperature, improve product quality and pass rate. ◆ The whole equipment is small and compact, and it is very convenient to use next to the forging machine hot and forging machine. ◆ Superior working environment, no pollution, low energy consumption.